The most important factor on our mind while upgrading our music system is matching the different components, like the amplifiers and the speakers. A bad setup can ruin the appearance and even ruin the sound quality, causing damage. Music enthusiasts want everything perfectly, whether it be their car, home theatre or any kind of setup. Amplifier and speaker play an important role – they’re the life of a party. But to ensure that the music quality is top-notch, you need to ensure that all the components, especially the amplifier and speakers, are working properly and match with each other. Proper alignment of these devices will elevate your experience, taking it to the next level.
However, it must be tricky for an amplifier to match the speaker, and the lack of proper alignment can cause lagging in the system, which, in time, can cause distortion and glitches. In this blog, we will discuss different ways in which you can match the devices and set up your music system.
Importance of matching amps with replacement speakers
- Prevention of distortion or clipping: If you put too much pressure on the amplifier, it will start working hard to supply more power, which will eventually break the sound and cause major distortion. This ruins the sound quality majorly.
- Prevention of speaker damage: The power should be at an average level, and it shouldn’t be overpowered or underpowered; this can result in the speaker drivers getting fried. This will cause major damage to the system.
- Insufficient performance: No matter how expensive your gear is, if the amplifier doesn’t match the speaker, the sound quality won’t be satisfactory. So even your expensive gear would be a waste of money if you do not match your system.
The ultimate guide to match amps with your replacement speakers.
- The first step is to check the RMS Power, then the maximum impedance and lastly the sensitivity of your device. This is important because it always varies from one device to another.
- The second important step is to match the rating and make sure that it is the nearest or closest to the impedance of your speaker. This is because the power output is different at various impedances.
- The step that comes after this is the alignment of the power rating. This is very crucial as you need to avoid extremely underpowered or excessively overpowered amplifiers. Before that, you must know how much RMS your speaker can handle.
- You also need to look after the sensitivity factors to choose the ideal amplifiers. If the speaker is of extremely high sensitivity, which is more than 90 dB, then we can go for a moderate amp, which can work perfectly. The lower sensitivity speakers go for the higher wattage amps for better performance.
- Make sure that the power of your amplifier is at least 20percent more than the total RMS rating of your speaker. This is a necessary step to prevent major distortion and make the sound quality smoother.
- Different devices are required for different environments and purposes. If it’s for the music system of your car, you can get more powerful amplifiers and speakers. The noises on the road might disturb the sound quality. If you are getting it for your personal music system, it’s better to get the best output ones with a greater range.
PRO TIP FOR YOU
You can use an external Equaliser if there is a lot of burden on the speaker. It will help to reduce the load on your speaker and ensure that the speaker lasts for longer time. This is perfect for you if you use your music system regularly.
Some replacement speakers for you
The WF 12120 8OHMS from 5 CORE is one of the smoothest replacement speakers, made of highly durable steel. Here are some features of this device:
- It has a maximum impedance of 80 HMS.
- These are a perfect fit for DJ setups and PA systems.
- The 1.5-inch voice coil is made to endure various harsh weather conditions.
- It has a 120 RMS and a peak power of 1200 W.
- The maximum frequency is around 40-3.5 Hz.
The TS-F1634R is another great device that you can go for. This is suitable for your vehicles such as a car or a truck. Let’s jump into the features:
- It has a maximum impedance of 4 ohms.
- It has a total range of around 20 meters.
- You can control this speaker through a remote.
Conclusion
Replacement speakers and amplifiers should always match for the sound quality to be top-notch. If one does not match the other, there will be glitches and heavy distortion. This is important to analyse before you invest.